UTC056(4th Gen MicroTCA Carrier Hub (MCH) 40/10GbE/PCIe/ FPGA/SRIO, Double Module)
MCH SWITCH / MCH
Fabric options include PCIe Gen3, 40/10GbE, SRIO, Cross Bar Switch (CBS) or Xilinx VU13P FPGA for complete flexibility •Front panel fabric expansion, e.g. quad Ports for PCIe Gen 3 (4x4, 2x8, or 1x16) •PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588 •Double module, full size per AMC.0 and MTCA.4
VME215 (12 / 24 Port 6U VME Managed Layer 2/3 Switch )
Referenced post not found. / VMEbus
VME compliant (only takes power from the VME bus) Managed Layer two and layer 3 switch/12 ports of 10/100/1000 via RJ-45 on the base board front panel IEEE 802.3-2005/IEEE 802.3ad (Link aggregation)/IEEE 802.1p (Prioritization)/IEEE 802.1Q (VLAN tagging) IEEE 802.1Q (Spanning Tree Protocol)/IEEE 802.1Q-2005 Multiple Spanning Tree Protocol (MSTP) Th…
VME217 VME-Layer2 Switchボード(RJ45/SX/LX/SFP)
ネットワーク / VMEbus
12/24 Port VME Managed Layer 2 Switch • VME compliant (only takes power from the VME bus) •Managed Layer two switch •8 ports of 10/100/1000 via RJ-45 and 4 ports 1000BASE-SX or 1000BASE-LX via SFF transceivers on the base board and optional 12 Ports via SFP Ports on expansion board •4K IEEE 802.1Q VLANs
VME218 VME Layer2 Switch
ネットワーク / VMEbus
The VME218 is a 6U single slot VME module that has 12 Ports of 10/100/1000 GbE via RJ-45 on its baseboard and 12 Ports via SFP+. With 24 Ports the module will take two slots. The module also comes with 24 ports of RJ-45 and it will take two slots. The switch is managed via http and supports a rich set of features such as VLAN, Spanning tree, QoS, M…
PCI103
デジタルI/O / PCI Express
・PCIe x4 Lanes ・Available in Copper or Fiber ・Single Fiber @2.5 Gb, Dual Fiber at 5 Gb/s and quad Fiber @10 Gb/sec. ・RoHS Compliant ・OS Support for: Linux, Windows, Solaris and VxWorks
ART113
ストレージ / AdvancedTCA
・ATCA rear I/O Module for Blades (i.e. Sun Microsystems Netra Blade CP3260, CP3220, etc.) ・VGA resolution @ 1920x1200 with 128MB ・On board 2.5 SAS/SATA Disk ・Three port USB 2.0 high speed (480Mbit/s) ・Front Blade Dual GbE to RJ-45 or LC Fiber (option for SX or LX) ・Front Blade RS-232 to DB-9 ・Dual RS-232 for the host blade ・IPMI 2.0 Management Cont…
ATC106
筐体 / AdvancedTCA
・AdvancedTCA 3.0 Release 2.0 Compliant ・2eSST VMEbus Compliant ・OS Support for: Linux, Windows, Solaris and VxWorks ・320 Mbyte/s transfer rate across the VMEbus ・VME System Controller or Peripheral slot (master or slave) ・Up/down PCIe stream to other ATC103/104/105/ATC106/ATC107/ ATC108/AMC103 and the PCI103 carrier boards via rear ・Up/down PCIe st…
VT842
筐体 / AdvancedTCA
・Six mid-height AMC slots per 1U Carrier or two double width mid-height with two mid-height AMC slots ・Cascade any number of 1U Carriers for Fabric expansion and management ・Management can run as Shelf/MCMC (MicroTCA Carrier Management Controller) or MCMC ・AMC.1, AMC.2, AMC.3, AMC.4 compliant ・PCIe, SRIO, 10GbE available on ports 4 to 7 and 8 to 11…
VT083
グラフィック /
・Dual DVI via single strand SC Fiber per channel ・Supports USB 2.0 over LC style fiber ・Fits into any assembly ・Four USB copper ports ・Link/Activity LED ・Input power +5V ・Provides power to each of the USB ports ・RoHS compliant
UTC012
その他 / AdvancedMC
・Single-width, full-height module per AMC.0 ・Dual 10 to 36 VDC input for 241W option and 18 to 36 VDC input for 460W option ・Two banks of 256K flash for redundancy ・Field upgradable ・IPMI 2.0 compliant ・HPM.1 compliant ・Without the presence of an MCH the modules can be turned on ・Menu driven software for ease of configuration ・Current measure for e…